Titanium Crucible

Titan: Start out with a low temp. 440F Medium Speed, 30 Second Sesh. From there you can move up if needed but we recommend staying below 465F for flavor. 

Magnum: Start at 440F (potentially as low as 430F with a low Sync) 30 Second run time. 

You can bump up to a 60 second run time if you have enough loaded. Otherwise stick to the 30 second Sesh for titanium. 

Flavor Rating: 3.7 / 5.0  

-----------------------------------------------------------------

Quartz Crucible

Titan: Start out with a Medium temp around 470F, no higher then 500F for 60 seconds. 

Magnum: 470F starting temp Medium for 60 seconds. Go up or down as needed but no higher then 500F 

Flavor Rating: 4.0 / 5.0

-----------------------------------------------------------------

Ceramic Crucible

Titan: Recommended settings of 460F Medium 60 Seconds. 30 Seconds may work depending on load size. Try to stay under 490F for flavor. 

Magnum: Starting temp of 450F Medium for 60 to 30 seconds depending on  load size and sync.

Flavor Rating 4.0 / 5.0

-----------------------------------------------------------------

SiC Crucible

Titan: Recommended settings of 440F Medium 60 Seconds. Stay below 480F for best experience.

Magnum: 430F Medium for 60 seconds for premium flavor. Stay below 470F.

Flavor Rating 4.75 / 5.0

For Fadespace SiC: We recommend a starting temp of 460F and a run time of 90 seconds with a Slow heat-up. Gradually increase the temp as needed.

-----------------------------------------------------------------

AlN Crucible

Titan: Recommended settings of 445F Medium 60 Seconds. Stay below 480F for best experience.

Magnum:  N/A

Flavor Rating 5.0 / 5.0